V-belt Optibelt SPB 2800
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPB
- Series
- SK metric profile V-belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and OPTIBELT: matching part numbers →OPTIBELT and STARK: matching part numbers →MITSUBOSHI and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT SPB 2800 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPB 2800 and any equivalents.
The Optibelt SPB 2800 is a narrow wedge V-belt in the SK metric profile series, built to SPB profile dimensions with a 2800 mm length. Before you fit a replacement, inspect the drive and sheaves so the new belt runs true from the start.
Check sheave grooves for wear, scoring or embedded debris, and confirm the grooves match the SPB profile. A worn sheave can damage a new belt quickly, so correct any misalignment or damaged groove before installation. Verify that the new belt's 16.3 mm top width, 13 mm height and 40° angle suit the drive.
The same size is also listed under Stark SPB 2800 and Mitsuboshi SPB 2800, which can help when you are matching an existing belt or comparing what is on the shelf. Confirm the marking on the old belt reads SPB 2800 before ordering.
To request a quote, send the part number SPB 2800, the quantity, and the drive or equipment it fits. If you are unsure of the correct belt, share the old belt's marking and a photo of the drive, and we will help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- SPB
- Length
- 2800mm
Frequently asked questions
- What should I check on the drive before installing an Optibelt SPB 2800?
- Inspect the sheave grooves for wear, misalignment or damage, and make sure they are clean and match the SPB profile. Confirm the belt sits correctly in the grooves and that the drive turns freely by hand.
- How do I identify the Optibelt SPB 2800 on an existing belt?
- Look for the marking on the back of the belt. The profile is SPB and the length is 2800 mm, with a top width of 16.3 mm, a height of 13 mm and a 40° angle.
- What information do you need to quote the Optibelt SPB 2800?
- Send the part number SPB 2800, the quantity you need, and the equipment or drive it fits. If you are replacing an unmarked belt, include the old belt's marking and a photo of the drive.