V-belt Optibelt SPB 2450
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPB
- Series
- SK S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT SPB 2450 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPB 2450 and any equivalents.
This Optibelt SPB 2450 belt is a narrow wedge V-belt from the SK S=C Plus series. It has a 16.3 mm top width, 13 mm height, and 40-degree angle. Before fitting, inspect the drive and sheaves.
A new belt will not correct worn sheaves. Check groove wear, cracks, or buildup on all sheaves in the drive. Verify alignment and that the sheave grooves match the SPB profile. Any misalignment or worn groove can shorten belt life.
Confirm the belt marking on the old belt matches the SPB profile and 2450 mm length. The Optibelt SPB 2450 is a narrow wedge V-belt with a 16.3 mm top width, 13 mm height, and 40-degree angle. If the old belt is not marked, measure the top width and outside length to confirm.
When replacing, consider all belts on the drive. If multiple belts run together, replace them as a set to maintain even tension. After installation, check tension and re-tension after the initial run-in period. For a quote, send the part number SPB 2450 and the quantity needed.
Dimensions
- Section
- SPB
- Length
- 2450mm
Frequently asked questions
- What should I check on the drive before installing this belt?
- Inspect sheave grooves for wear, cracks, or buildup. Check alignment of all sheaves and verify that the groove profile matches the SPB cross-section. Correct any issues before fitting the new belt.
- How do I confirm this is the right belt for my drive?
- Compare the old belt marking to SPB 2450. The Optibelt SPB 2450 has a 16.3 mm top width, 13 mm height, and 40-degree angle. If the marking is unreadable, measure the top width and outside length.
- What information do I need to request a quote?
- Send the part number SPB 2450 and the quantity required. If you are unsure about the profile or length, include the old belt marking or dimensions and our team can help confirm.