V-belt Optibelt SPB 2180
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPB
- Series
- SK metric profile V-belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT SPB 2180 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPB 2180 and any equivalents.
The Optibelt SPB 2180 is a narrow wedge V-belt in the SK metric profile series. Its SPB profile and 2180 mm length identify the belt for your drive, and the 16.3 mm top width, 13 mm height and 40° angle complete the dimensional match. Use these figures when comparing the belt on the drive or the marking on an old belt.
The SPB profile sets the cross-section: 16.3 mm across the top, 13 mm high, with a 40° angle. The 2180 mm length is the datum you need to match. A belt with the same SPB profile but a different length will not sit correctly in the sheave grooves, so confirm both the profile and the length before ordering.
The cleanest way to identify a replacement is to read the marking on the back of the belt. Look for SPB and 2180 together. If the marking is worn or the belt is off the machine, measure the top width and height and compare them with the figures above, then check the length against the drive.
When you request a quote, send the part number SPB 2180 and the quantity you need. If you are replacing a set, include the number of belts on the drive so the team can match the full set. We carry Optibelt belts and can confirm the SPB 2180 or suggest an equivalent from the data you provide.
Dimensions
- Section
- SPB
- Length
- 2180mm
Frequently asked questions
- What do the profile and length tell me about this belt?
- The SPB profile gives the cross-section: 16.3 mm top width, 13 mm height and a 40° angle. The 2180 mm length is the outside length datum. Both must match the drive for the belt to run correctly.
- How do I confirm this is the belt on my drive?
- Read the marking on the back of the belt. You are looking for SPB and 2180. If the marking is not legible, measure the top width and height and compare them with 16.3 mm and 13 mm, then check the length.
- What should I send to request a quote?
- Send the part number SPB 2180 and the quantity. If you are replacing a set, include the number of belts on the drive so the team can match the set.