V-belt Optibelt SPB 2020
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPB
- Series
- SK metric profile V-belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT SPB 2020 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPB 2020 and any equivalents.
This Optibelt SPB 2020 is a narrow wedge V-belt in the SK metric profile series. It is used in industrial drives where a compact, high-capacity belt is needed. To confirm fit, match the SPB profile and the 2020 mm length to your drive.
The SPB profile is a metric narrow wedge section. This belt has a top width of 16.3 mm, a height of 13 mm, and a 40-degree angle. The length is 2020 mm. These dimensions let you compare it directly with the belt currently on the drive.
Narrow wedge V-belts are common on pumps, fans, compressors, and other industrial machinery. Check the old belt for the SPB marking and the length before ordering. If the drive uses multiple belts, replace the full set so the load stays even across the grooves.
The same size is also listed under Gates SPB 2020. We carry Optibelt belts and can help confirm the right belt or suggest an equivalent. Send the part number and a photo of the old belt marking by WhatsApp or email for a quote.
Dimensions
- Section
- SPB
- Length
- 2020mm
Frequently asked questions
- How do I confirm that the SPB 2020 fits my drive?
- Check the old belt for the SPB profile and the 2020 mm length. Also confirm the top width of 16.3 mm and the height of 13 mm if you can measure them. If the markings are worn, send a photo of the belt and the drive sheaves.
- What does the 40-degree angle mean for this belt?
- The 40-degree angle is the included angle of the V-section. It must match the sheave groove angle for the belt to seat correctly. A mismatch can cause slip, heat, and short belt life.
- Can I replace just one belt on a multi-belt drive?
- For drives with two or more belts, replace the full set at the same time. Mixing a new belt with used belts can make the new belt carry more than its share of the load. Keep the set matched by profile and length.