V-belt Optibelt SPB 2000
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPB
- Series
- SK metric profile V-belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and OPTIBELT: matching part numbers →OPTIBELT and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT SPB 2000 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPB 2000 and any equivalents.
The Optibelt SPB 2000 is a narrow wedge V-belt in the SK metric profile series. When replacing a belt on a metric drive, the marking on the old belt is the first thing to check: the SPB profile and the 2000 mm length must match. This belt has a 16.3 mm top width, a 13 mm height and a 40° angle.
To match it to the belt being replaced, read the back of the old belt. Look for SPB and 2000. If the old belt is worn or the marking is gone, measure the top width and height: 16.3 mm top width and 13 mm height correspond to the SPB profile. The 2000 mm length is the datum length for this belt.
The same size is also listed under Stark SPB 2000. If your drive uses more than one belt, replace the full set at the same time so the belts share the load evenly. After installation, check the tension and re-check it after the first run-in period.
For a quote, send the part number SPB 2000, the brand Optibelt and the quantity you need. If you are unsure about the profile or length, send a photo of the marking on the old belt. Our team can confirm the right belt for your drive.
Dimensions
- Section
- SPB
- Length
- 2000mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Check the marking on the old belt for SPB and 2000. You can also measure the top width and height: 16.3 mm top width and 13 mm height match the SPB profile. The length is 2000 mm.
- What are the dimensions of the Optibelt SPB 2000?
- It has an SPB profile, a 2000 mm length, a 16.3 mm top width, a 13 mm height and a 40° angle.
- What should I send to request a quote?
- Send the part number SPB 2000, the brand Optibelt and the quantity. If you are unsure, send a photo of the old belt marking and our team will help confirm.