V-belt Optibelt SPB 1900 BP2
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPB
- Series
- Blue Power 2
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT SPB 1900 BP2 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPB 1900 BP2 and any equivalents.
When replacing a narrow wedge V-belt, matching the profile and length on the old belt is the first step. The Optibelt SPB 1900 BP2 from the Blue Power 2 series gives you a direct reference: SPB profile, 1900 mm length. This page covers what to check before you request a quote.
Start by reading the marking on the back of the belt you are replacing. Look for the profile (SPB) and the length in millimeters (1900). If the old belt is worn or the marking is unreadable, measure the top width and height: this belt has a 16.3 mm top width and 13 mm height, with a 40° angle. Those dimensions confirm it is a narrow wedge V-belt, not a classic V-belt or a cogged variant.
Once you have confirmed the profile and length, check the drive for any signs of misalignment, worn sheaves, or uneven belt wear. Replacing a single belt on a multi-belt drive can lead to mismatched lengths, so inspect all belts in the set and replace them together if needed. The SPB 1900 BP2 is supplied by Optibelt as part of the Blue Power 2 series, a line of narrow wedge V-belts.
To request a quote, send the part number SPB 1900 BP2, the quantity, and any details about the drive. If you are unsure whether this is the correct belt, include a photo of the old belt's marking and the sheave dimensions. Our team can help confirm the right belt or suggest an equivalent based on the profile and length.
Dimensions
- Section
- SPB
- Length
- 1900mm
Frequently asked questions
- How do I confirm this is the correct replacement belt?
- Check the marking on your old belt for SPB and 1900. If it is unreadable, measure the top width (16.3 mm), height (13 mm), and angle (40°) to verify it matches the SPB profile. The length is 1900 mm.
- Can I replace just one belt on a multi-belt drive?
- It is best to replace all belts in a set at the same time. Mixing new and worn belts can cause uneven tension and premature wear. Confirm the quantity you need when requesting a quote.
- What information should I send for a quote?
- Send the part number SPB 1900 BP2, the quantity required, and any drive details or photos of the old belt marking. If you need help cross-referencing, include the sheave dimensions.