V-belt Optibelt SPB 1700 BP
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPB
- Series
- Blue Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT SPB 1700 BP belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPB 1700 BP and any equivalents.
The Optibelt SPB 1700 BP is a narrow wedge V-belt from the Blue Power series. It is built to the SPB profile with a 1700 mm length, a 16.3 mm top width, a 13 mm height and a 40° angle. This page helps you match it to the belt you are replacing.
Start by reading the marking on the back of the old belt. You are looking for the profile and the length: SPB and 1700. If the old belt is worn or the marking is gone, measure the top width and the height across a straight section and compare them with 16.3 mm and 13 mm. The 40° angle is the included angle of the V-section.
Once you have confirmed the profile and length, check the drive before ordering. Look for uneven wear on the flanks, cracks, glazing or missing cord. A narrow wedge V-belt like this one runs in SPB pulleys, so the groove width and the pulley condition matter as much as the belt itself. If the drive uses more than one belt, replace the full set so the load stays even.
For a quote, send the part number Optibelt SPB 1700 BP, the quantity you need and a photo of the old belt marking if you have one. If the marking is unclear, include the profile, the length and the pulley dimensions. We carry the Optibelt Blue Power line and can confirm the belt or suggest an equivalent from the details you send.
Dimensions
- Section
- SPB
- Length
- 1700mm
Frequently asked questions
- How do I confirm that this is the belt I need?
- Read the marking on the back of the old belt and look for SPB and 1700. If it is unreadable, measure the top width and the height and compare them with 16.3 mm and 13 mm. The profile and the length are the two values that must match.
- What should I check on the drive before replacing the belt?
- Inspect the pulley grooves for wear, rust or debris, and check the belt for cracks, glazing or exposed cord. If the drive uses multiple belts, replace them as a set so they share the load evenly.
- What information do you need to quote this belt?
- Send the part number Optibelt SPB 1700 BP and the quantity. A photo of the old belt marking or the pulley dimensions helps us confirm the profile and length if the marking is not clear.