V-belt Optibelt SPA 3032
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPA
- Series
- SK metric profile V-belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT SPA 3032 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPA 3032 and any equivalents.
This Optibelt SPA 3032 is a narrow wedge V-belt in the SK metric profile series. It is used on industrial drives where an SPA profile belt of this length is specified, such as pumps, fans, compressors and other driven equipment. To confirm fit, compare the profile and the 3032 mm length against the belt you are replacing.
The belt measures 12.7 mm across the top, 10 mm high and has a 40° angle. These dimensions, together with the SPA profile and the 3032 mm length, are the values to check before ordering. If the old belt is worn or the marking is unreadable, measure the outside length and the top width, and note the profile from the drive or the machine manual.
Narrow wedge V-belts in the SPA profile are used on drives that need a compact cross-section for the power transmitted. They run in matched grooves, so a worn or stretched belt can affect the other belts on a multi-groove drive. Inspect the sheaves for wear, alignment and debris, and replace belts in sets where the drive uses more than one.
We carry the Optibelt SPA 3032 and supply it to maintenance, engineering and purchasing teams in the United States, Canada, Mexico and South America. Send the part number, the profile and the length by WhatsApp or email to request a quote.
Dimensions
- Section
- SPA
- Length
- 3032mm
Frequently asked questions
- How do I confirm that the SPA 3032 is the right belt for my drive?
- Check the old belt marking for the SPA profile and the 3032 mm length. If it is unreadable, measure the top width, the height and the outside length, and compare them with the 12.7 mm top width, 10 mm height and 40° angle listed for this belt. The drive or machine manual may also state the required profile and length.
- What should I send to request a quote for this belt?
- Send the part number Optibelt SPA 3032, or the profile and length, by WhatsApp or email. If you are replacing an unmarked belt, include the measured top width, height and length so we can help confirm the correct belt.
- Can this belt be used on a drive with multiple belts?
- Yes, narrow wedge V-belts are commonly used in multi-groove drives. When replacing belts on a drive with more than one belt, inspect all grooves and replace the set together so the belts share the load evenly.