V-belt Optibelt SPA 2847
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPA
- Series
- SK metric profile V-belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT SPA 2847 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPA 2847 and any equivalents.
The Optibelt SPA 2847 is a narrow wedge V-belt in the SK metric profile series. It has an SPA profile, a 2847 mm length, a 12.7 mm top width, a 10 mm height and a 40° angle. Before you fit it, inspect the drive and sheaves so the new belt runs true.
Check the sheave grooves for wear, scoring or embedded debris, and confirm the groove profile matches the SPA section. Measure the groove wear and look for a step or ridge that would keep the belt from seating. Misaligned shafts or worn bearings will shorten the life of any narrow wedge belt, including this one.
Confirm the old belt marking and the drive layout before ordering. The SPA 2847 is identified by its SPA profile and 2847 mm length, along with the 12.7 mm top width, 10 mm height and 40° angle. If the drive uses more than one belt, replace the set together so the load is shared evenly.
Send the part number, the quantity and the drive details for a quote. We carry the Optibelt SPA 2847 and can help confirm it matches your application or suggest an equivalent. A photo of the old belt marking and the sheave grooves helps us reply promptly.
Dimensions
- Section
- SPA
- Length
- 2847mm
Frequently asked questions
- What are the dimensions of the Optibelt SPA 2847?
- It is an SPA profile narrow wedge V-belt with a 2847 mm length, a 12.7 mm top width, a 10 mm height and a 40° angle.
- Should I replace all belts on the drive at once?
- Yes. On a multi-belt drive, fit the full set together so each belt carries its share of the load. Mixing a new belt with worn ones can overload the new belt.
- What should I check before fitting this belt?
- Inspect the sheave grooves for wear, scoring or debris, verify the SPA groove profile, and check shaft alignment and bearing condition. Correct any issue before fitting the new belt.