V-belt Optibelt SPA 2682 RP
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPA
- Series
- Red Power 3 S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT SPA 2682 RP belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPA 2682 RP and any equivalents.
The Optibelt SPA 2682 RP is a narrow wedge V-belt from the Red Power 3 S=C Plus series. It measures 2682 mm in length with an SPA profile, a 12.7 mm top width, a 10 mm height and a 40 degree angle. When you are replacing a belt, matching these markings to the belt on the drive is the first step.
Start by reading the marking on the back of the belt you are removing. If it shows SPA and 2682, this belt matches the profile and the length. The SPA profile is a narrow wedge section, so the 12.7 mm top width and 10 mm height need to line up with the pulley groove it runs in.
If the old belt is worn or the marking is no longer readable, measure the outside length and compare it to the 2682 mm figure, and check the cross section against the 12.7 mm by 10 mm dimensions. The 40 degree angle is part of the SPA profile, so a belt of another section is not a substitute even when the length looks close.
Once the belt is off, inspect the pulleys for wear, alignment and debris before the new belt goes on. On drives with more than one belt, replace the full set together so the load stays evenly shared. Send us the part number, or the marking from the old belt, and our team will confirm the SPA 2682 RP or suggest an equivalent.
Dimensions
- Section
- SPA
- Length
- 2682mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Compare the marking on the belt you are replacing to the SPA profile and the 2682 mm length. The SPA section is 12.7 mm at the top, 10 mm high and has a 40 degree angle, so it must match the pulley groove.
- What should I send to request a quote?
- Send the part number SPA 2682 RP, or the full marking from the back of the old belt, by WhatsApp or email. If the marking is gone, give us the belt dimensions and the drive details and we will help confirm the right belt.
- Should I replace more than one belt at a time?
- On a multi-belt drive, replace the belts as a set. Mixing a new belt with worn belts can leave the load unevenly shared across the drive.