V-belt Optibelt SPA 2532
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPA
- Series
- SK metric profile V-belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT SPA 2532 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPA 2532 and any equivalents.
The Optibelt SPA 2532 is a narrow wedge V-belt in the SK metric profile V-belts series. Its SPA profile and 2532 mm length are the two figures that identify the belt in a drive, so both are worth confirming against the old belt before you order.
The SPA profile is a metric narrow wedge section. This belt has a 12.7 mm top width, a 10 mm height and a 40° angle. The 2532 mm length is stated in millimeters, as metric drives are dimensioned. Read these figures from the marking on the back of the old belt and compare them with the data here.
For a quote, send the part number SPA 2532, the quantity, and the drive or equipment it runs on. If the marking is worn or the belt is missing, send the profile and length you measured, plus the pulley dimensions if you have them, and our team can help confirm the right belt or suggest an equivalent.
When you replace a narrow wedge V-belt, inspect the pulleys for wear, alignment and buildup, and check the tension after the first run-in. On drives with more than one belt, replace the full set so the belts share the load evenly.
Dimensions
- Section
- SPA
- Length
- 2532mm
Frequently asked questions
- What do the profile and length of the SPA 2532 tell me?
- The SPA profile defines the metric narrow wedge cross-section: 12.7 mm top width, 10 mm height and a 40° angle. The 2532 mm length defines the belt's length. Both must match the drive and the old belt.
- How do I confirm this is the right belt for my drive?
- Read the marking on the back of the old belt and compare the profile and length with the data on this page. If the marking is unreadable, measure the top width, height and length, and send those figures with your request.
- What should I send to request a quote?
- Send the part number SPA 2532, the quantity you need, and the equipment or drive it fits. If you are unsure of the profile or length, include the old belt marking or your measurements so we can help confirm the right belt.