V-belt Optibelt SPA 2300 RP
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPA
- Series
- Red Power 3 S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT SPA 2300 RP belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPA 2300 RP and any equivalents.
The Optibelt SPA 2300 RP is a narrow wedge V-belt from the Red Power 3 S=C Plus series. With an SPA profile and a 2300 mm length, it is suited to industrial drives that require a compact, high-capacity belt. Before fitting this belt, inspect the drive and sheaves to avoid premature wear and ensure proper alignment.
Check sheave grooves for wear, corrosion, or embedded debris. Worn grooves can cause the belt to sit too deep, reducing grip and leading to slippage. Verify that the sheaves are aligned and that the drive is free of obstructions. The SPA profile has a 12.7 mm top width, 10 mm height, and 40° angle, so groove dimensions must match this profile for correct contact.
Inspect the old belt for signs of cracking, glazing, or separation. If the drive uses multiple belts, replace them as a set to maintain equal tension and load sharing. Confirm that the new belt length matches the application: the SPA 2300 RP is 2300 mm long. After installation, recheck tension and alignment after the first few hours of operation.
Dimensions
- Section
- SPA
- Length
- 2300mm
Frequently asked questions
- What should I check on the drive before installing this belt?
- Inspect sheave grooves for wear, rust, or damage, and confirm that the sheaves are aligned. Also check that the drive is clean and that the belt path is free of obstructions.
- Can I replace just one belt in a multi-belt drive?
- It is best practice to replace all belts in a set at the same time. Mixing new and used belts can lead to uneven tension and load distribution.
- How do I confirm this is the right belt for my drive?
- Match the profile (SPA), length (2300 mm), and dimensions (12.7 mm top width, 10 mm height, 40° angle) to your drive requirements. If uncertain, provide the part number from your old belt when requesting a quote.