V-belt Optibelt SPA 1957 RP
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPA
- Series
- Red Power 3 S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT SPA 1957 RP belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPA 1957 RP and any equivalents.
The Optibelt SPA 1957 RP is a narrow wedge V-belt from the Red Power 3 S=C Plus series. If you are replacing a worn belt, the first step is to confirm the profile and the length against the belt you are removing. This page gives you the exact figures so you can match it correctly.
The belt is an SPA profile with a 1957 mm length. Its top width is 12.7 mm, its height is 10 mm, and its angle is 40 degrees. These are the values to compare with the marking on the back of the old belt and with your drive documentation. A belt that is too long, too short, or of the wrong profile will not sit correctly in the pulley grooves.
When you check the old belt, read the profile and length directly from its back. If the marking is worn or missing, measure the outside length and the top width, then compare them with the figures above. The SPA profile is a narrow wedge section, so it should not be confused with a classical V-belt of similar width. If you are unsure, send a photo of the old belt and the drive setup.
To request a quote, send the part number SPA 1957 RP by WhatsApp or email. Include the quantity and any drive details you have. The team replies promptly and can confirm the belt or suggest an equivalent if needed.
Dimensions
- Section
- SPA
- Length
- 1957mm
Frequently asked questions
- How do I confirm this belt matches the one I am replacing?
- Check the profile and length on the back of the old belt. This belt is SPA profile with a 1957 mm length, a 12.7 mm top width, a 10 mm height, and a 40 degree angle. If the old marking is unreadable, measure the outside length and top width and compare them with these figures.
- Can you help if I am not sure about the profile?
- Yes. Send the part number you have, a photo of the old belt, and a photo of the pulley grooves. The team can review the details and confirm whether SPA 1957 RP is the correct fit or suggest an equivalent.
- What information should I include with my quote request?
- Send the part number SPA 1957 RP, the quantity you need, and any drive details such as the pulley diameters or the application. If you are replacing a belt, include the marking from the old belt if it is still readable.