V-belt Optibelt SPA 1807
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPA
- Series
- SK metric profile V-belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT SPA 1807 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPA 1807 and any equivalents.
This Optibelt SPA 1807 is a narrow wedge V-belt in the SK metric profile series. It is built for industrial drives where an SPA profile and an 1807 mm length are the required fit. Confirm both the profile and the length before you request a quote.
Narrow wedge V-belts like this SPA profile are common on compact, higher-speed industrial drives: pumps, fans, compressors, and similar equipment where a standard-width belt would take up too much room. The 12.7 mm top width, 10 mm height, and 40° angle match the SPA groove this belt is made to run in.
To confirm fit, read the marking on the back of the old belt and compare it with the profile and length on this page. Check the pulley grooves for wear, cracks, or debris, and verify that the belt sits correctly in the groove rather than riding high or bottoming out. If the drive uses multiple belts, replace the full set at the same time so the load stays even.
For a quote, send the part number SPA 1807, the quantity, and the equipment or drive it goes on. If you are unsure whether this is the right belt, send a photo of the old belt's marking and the pulley dimensions, and our team can help confirm the profile and length or suggest an equivalent.
Dimensions
- Section
- SPA
- Length
- 1807mm
Frequently asked questions
- How do I confirm that the Optibelt SPA 1807 fits my drive?
- Check the marking on the old belt for the SPA profile and 1807 mm length. Also inspect the pulley grooves to confirm they are cut for an SPA profile and are in good condition.
- Can I replace just one belt on a multi-belt drive?
- It is best practice to replace all belts on the drive at the same time. Mixing a new belt with worn belts can cause uneven load sharing and shorter belt life.
- What information should I send with my quote request?
- Send the part number SPA 1807, the quantity you need, and the equipment or drive it is used on. If you are unsure of the fit, include a photo of the old belt's marking and the pulley dimensions.