V-belt Optibelt SPA 1532 RP
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPA
- Series
- Red Power 3 S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT SPA 1532 RP belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPA 1532 RP and any equivalents.
This Optibelt SPA 1532 RP is a narrow wedge V-belt from the Red Power 3 S=C Plus series. It is built for industrial drives where a compact, high-grip belt is needed, and it is identified by its SPA profile and 1532 mm length.
Narrow wedge belts like this one are common on machine tools, pumps, fans, compressors and similar driven equipment, where the drive runs in a matched set of pulleys and the belt must sit correctly in the groove. The SPA profile gives a 12.7 mm top width, a 10 mm height and a 40 degree angle, so it fits pulleys machined for SPA section belts.
To confirm fit, read the marking on the back of the old belt and compare it with the part number, profile and length on this page. Check the pulley grooves for wear, oil or debris, and make sure the belt tension and alignment are set to the drive maker's specification before the machine is returned to service. If the old marking is worn or unreadable, measure the outside length and the top width, then send those figures along with the drive details.
Where a drive uses more than one belt, replace the full set at the same time so the load is shared evenly across the grooves. Send the part number, the quantity and a photo of the belt marking or the drive nameplate by WhatsApp or email, and the team will confirm the right belt or suggest an equivalent.
Dimensions
- Section
- SPA
- Length
- 1532mm
Frequently asked questions
- How do I confirm this Optibelt SPA 1532 RP fits my drive?
- Compare the marking on the old belt with the part number, SPA profile and 1532 mm length shown here, and check that the pulleys are cut for SPA section belts. If the marking is gone, measure the belt and send the drive details to the team.
- What information should I send for a quote?
- Send the part number SPA 1532 RP, the quantity you need and a photo of the belt marking or drive nameplate by WhatsApp or email. If the belt is part of a set, include the number of belts in the drive.
- Should I replace all the belts on a multi-belt drive at once?
- Yes. On a drive that runs more than one belt, fitting a complete set helps keep tension and load even across the grooves. Order the number of belts the drive requires rather than a single belt.