V-belt Optibelt SPA 1482 RP
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPA
- Series
- Red Power 3 S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT SPA 1482 RP belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPA 1482 RP and any equivalents.
The Optibelt SPA 1482 RP is a narrow wedge V-belt from the Red Power 3 S=C Plus series. To match it to the belt you are replacing, start with the marking on the old belt and confirm the profile and length.
Check the back of the belt being replaced for a marking that shows the profile and length. The SPA profile is a narrow wedge section with a 12.7 mm top width, a 10 mm height, and a 40-degree angle. The length for this belt is 1482 mm. If the old marking matches these values, the Optibelt SPA 1482 RP is the correct replacement.
When the marking is worn or missing, measure the old belt. The top width should be 12.7 mm, the height 10 mm, and the angle 40 degrees. The length is measured as 1482 mm. Compare those dimensions to the SPA 1482 RP. If the profile and length agree, the belt will fit the same drive.
If you are unsure, send the part number from the old belt or the drive details. We carry the Optibelt SPA 1482 RP and can confirm it against your application. Provide the profile, length, and any other markings so we can help you match it correctly.
Dimensions
- Section
- SPA
- Length
- 1482mm
Frequently asked questions
- How do I confirm the Optibelt SPA 1482 RP is the right replacement?
- Look for a marking on the old belt that shows the profile and length. The SPA 1482 RP has an SPA profile and a length of 1482 mm. If the old belt shows the same profile and length, it is the correct match.
- What should I measure if the old belt marking is unreadable?
- Measure the top width, height, and angle of the old belt. The SPA 1482 RP has a top width of 12.7 mm, a height of 10 mm, and a 40-degree angle. The length is 1482 mm. Compare those measurements to confirm.
- What information should I send to request a quote?
- Send the part number Optibelt SPA 1482 RP or the profile and length from the old belt. If you have the old belt, include any markings on the back. We will confirm the match and reply by WhatsApp or email.