V-belt Optibelt SPA 1407
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPA
- Series
- SK metric profile V-belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT SPA 1407 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPA 1407 and any equivalents.
This Optibelt SPA 1407 is a narrow wedge V-belt in the SK metric profile series. It is used on industrial drives that require an SPA profile belt with a 1407 mm length. Confirm fit by checking the belt's markings and the drive's pulley grooves.
The SPA profile is a metric narrow wedge section, and this belt has a top width of 12.7 mm, a height of 10 mm, and a 40° angle. It is not a cogged or banded belt. Use it on drives where the pulley grooves match the SPA section and the required datum length is 1407 mm.
To confirm fit, read the marking on the back of the old belt. It should show the profile and length, such as SPA 1407. If the old belt is worn or the marking is unreadable, measure the outside length and compare it to 1407 mm, and check the pulley groove width with a gauge. The belt should sit correctly in the groove without bottoming out.
When replacing, inspect the pulleys for wear and misalignment, and check the tension according to the drive manufacturer's specification. If multiple belts run on the same drive, replace them as a set to keep lengths matched. For a quote, send the part number SPA 1407 and the quantity you need.
Dimensions
- Section
- SPA
- Length
- 1407mm
Frequently asked questions
- How do I confirm that the Optibelt SPA 1407 fits my drive?
- Check the marking on the old belt. It should show SPA and 1407. Also verify that the pulley grooves are for an SPA profile and that the required length is 1407 mm.
- What are the dimensions of this belt?
- It has a top width of 12.7 mm, a height of 10 mm, a 40° angle, and a length of 1407 mm.
- Can I replace just one belt on a multi-belt drive?
- If the drive uses multiple belts, replace them as a set to keep lengths matched and avoid uneven loading.