Timing belt Optibelt SL 470 S8MHP 1360
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- STD HP
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT SL 470 S8MHP 1360 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SL 470 S8MHP 1360 and any equivalents.
This Optibelt SL 470 S8MHP 1360 is a timing belt in the STD HP series. It has an STD profile and a length of 1360 mm. Timing belts like this one are used on drives where the belt teeth mesh with pulley grooves to keep the shafts synchronized.
When you need to confirm fit, start with the belt you are replacing. Check the marking on the back of the old belt and compare it to the part number, profile and length shown here. The profile is STD and the length is 1360 mm. If the old belt is worn or the marking is unreadable, measure the length and note the tooth profile before ordering.
A timing belt should be inspected as part of regular drive maintenance. Look for cracked or missing teeth, frayed cords, glazing on the sides, and any oil or coolant contamination. Check the pulleys for worn grooves, debris and proper alignment. If the drive runs more than one belt, replace the set together so the load stays even.
To request a quote, send the part number SL 470 S8MHP 1360 by WhatsApp or email. If you are not certain this is the correct belt, include the old belt marking, the profile and the length. Our team can help confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- STD
- Length
- 1360mm
Frequently asked questions
- What does this belt fit?
- This is an Optibelt timing belt with an STD profile and a 1360 mm length. Fit depends on your drive's pulley profile and center distance. Confirm against the old belt marking or send us your drive details.
- How do I read the marking on my old belt?
- The back of the belt usually shows the part number, profile and length. Compare those to SL 470 S8MHP 1360. If the marking is worn, measure the length and identify the tooth profile.
- Can you help me confirm the right belt?
- Yes. Send the part number, the old belt marking, or the profile and length by WhatsApp or email. We will help confirm the right belt or suggest an equivalent.