Poly-V belt Optibelt PH 975
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Poly-V belts
- Series
- RB
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT PH 975 belongs to poly-V belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PH 975 and any equivalents.
The Optibelt PH 975 RB is a Poly-V (multi-rib) belt with a PH profile and a 975 mm length. Those two figures are what you match against the belt you are replacing. We carry this belt and quote by part number.
The PH profile identifies the rib pitch and belt thickness the pulleys are cut for. The 975 mm length is the datum you compare with the old belt's marking or a measured run around the drive. Both values must agree with the drive before the belt goes on.
For a quote, send the part number PH 975, the quantity, and a photo of the back of the old belt if the marking is worn. If the drive uses more than one belt, note that on the request so the set is quoted together.
When the belt arrives, check the marking against the drive and inspect the pulleys for wear or debris before installation. A belt that matches profile and length is the starting point; the drive condition decides how long it runs.
Dimensions
- Profile
- PH
- Length
- 975mm
Frequently asked questions
- What does the PH profile mean on this belt?
- PH is the profile of this Optibelt Poly-V belt. It sets the rib pitch and belt thickness, so the pulleys on your drive must be cut for PH.
- How do I confirm the 975 mm length?
- Compare it with the marking on the back of the belt you are replacing, or measure the run around the drive. The PH 975 is the belt to quote when both the profile and the length match.
- What should I send with a quote request?
- Send the part number PH 975, the quantity you need, and a photo of the old belt's back marking. If the drive takes a set, say so and we will quote the set.