Timing belt Optibelt MXL K 560
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Torque
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT MXL K 560 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for MXL K 560 and any equivalents.
When replacing a timing belt, the most reliable starting point is the marking on the old belt. This Optibelt Alpha Torque belt carries the code MXL K 560, with an MXL profile and a length of 142.24 mm.
Before ordering, inspect the belt you are replacing. Confirm that the profile reads MXL and that the length matches 142.24 mm. If the old belt is worn or the marking is no longer legible, measure the length and compare it with the data here. Do not rely on a belt that only looks similar; the profile and length must match the drive's requirements.
The MXL profile and 142.24 mm length define this belt. If the existing belt is a different profile or length, it is not a direct replacement. If the drive uses more than one belt, replace them as a set so the load is shared evenly. Check pulleys for wear, alignment, and tension during the change, and follow the drive manufacturer's tensioning procedure.
We carry the Optibelt Alpha Torque MXL K 560 timing belt. To request a quote, send the part number MXL K 560, the profile MXL, and the length 142.24 mm by WhatsApp or email. If you have the old belt in hand, include a photo of the back marking. Our team will confirm the belt or suggest an equivalent.
Dimensions
- Profile
- MXL
- Length
- 142.24mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Check the marking on the belt being replaced. It should show the MXL profile and a length of 142.24 mm. If the marking is unreadable, measure the length and compare it to 142.24 mm.
- What should I send to get a quote?
- Send the part number MXL K 560, along with the profile MXL and length 142.24 mm, by WhatsApp or email. A photo of the old belt's back marking helps us confirm the match.
- Should I replace more than one belt at a time?
- If the drive uses multiple belts, replace them as a set. This helps maintain even load sharing and consistent tension across the drive.