Timing belt Optibelt MXL K 2200
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Torque
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT MXL K 2200 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for MXL K 2200 and any equivalents.
The Optibelt MXL K 2200 is a timing belt in the Alpha Torque series with an MXL profile and a length of 558.8 mm. It is built for synchronous drives where the belt teeth mesh with pulley grooves to maintain timing between shafts. This belt is commonly found on light-duty drives in industrial machinery and small equipment.
To confirm fit, check the old belt for its profile and length marking. The MXL profile and 558.8 mm length must match the pulley groove type and the drive's center distance. If the marking is worn, measure the belt width and count teeth only if you can verify them against the original specification.
Timing belts are used on drives that require exact synchronization, such as those on pumps, compressors, and positioning systems. Inspect the pulleys for worn grooves, proper alignment, and correct tension. A belt that runs too loose can jump teeth; too tight can damage bearings and the belt.
When ordering, send the part number MXL K 2200, the profile, and the length. If you have the old belt, include a photo of the back marking. For drives with multiple belts, replace all belts at the same time to keep loads even.
Dimensions
- Profile
- MXL
- Length
- 558.8mm
Frequently asked questions
- How do I confirm the Optibelt MXL K 2200 will fit my drive?
- Compare the profile (MXL) and length (558.8 mm) with the old belt's marking or the drive's specification. The pulley grooves must match the MXL profile, and the center distance must suit the 558.8 mm length.
- What should I send to get a quote for this belt?
- Send the part number MXL K 2200, the profile MXL, and the length 558.8 mm. If you have the old belt, a photo of the back marking helps confirm the correct item.
- Can I replace just one belt on a multi-belt drive?
- On drives with multiple timing belts, replace all belts in the set at the same time so they share the load evenly. Mixing a new belt with old ones can cause uneven tension and premature wear.