Timing belt Optibelt MXL 3200
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- ZR
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT MXL 3200 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for MXL 3200 and any equivalents.
The Optibelt MXL 3200 is a timing belt with an MXL profile and a length of 812.8 mm. It is used in light-duty drives where exact synchronization between shafts is required, such as small conveyors, instrumentation, and compact power transmission systems. Confirm your drive takes an MXL profile and a 812.8 mm length before ordering.
To verify fit, check the old belt's back marking for the profile and length, or measure the pitch length and compare it to 812.8 mm. The MXL profile is a fine-pitch tooth form, so the pulley grooves must match it exactly. If the marking is worn or unreadable, send us photos of the belt and pulleys along with your equipment details.
Timing belts should be inspected for tooth wear, cracking, glazing, and tension loss. Replace the belt if any of these are present, and check pulley alignment and bearing play at the same time. When a drive uses multiple belts, replace them as a set to keep loads even.
Dimensions
- Profile
- MXL
- Length
- 812.8mm
Frequently asked questions
- How do I confirm the Optibelt MXL 3200 fits my drive?
- Check that your pulleys are cut for the MXL profile and that the required pitch length is 812.8 mm. The old belt's back marking is the fastest reference; if it is unreadable, measure the length and send us the details.
- What should I send for a quote on this belt?
- Send the part number MXL 3200, the quantity you need, and any photos of the old belt or drive. If you are unsure of the profile or length, include the equipment make and model so we can help confirm.
- Can I replace just one belt in a multi-belt drive?
- It is good practice to replace all belts in a set at the same time. Mixing a new belt with worn ones can cause uneven tension and load sharing, which shortens belt life.