V-belt Optibelt HBB 2800
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BB
- Series
- DK
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT HBB 2800 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for HBB 2800 and any equivalents.
This Optibelt HBB 2800 is a double-V (hexagonal) belt in the BB profile with a length of 2800 mm. Double-V belts are used where a drive needs power transmitted from both sides of the belt, typically in reversing or multi-pulley layouts. Confirm fit by matching the profile and length to the belt you are replacing.
On a double-V belt, both faces are ribbed, so the belt can drive pulleys on either side. Before ordering, read the marking on the back of the old belt and compare it with the profile and length shown here. The part number HBB 2800 identifies this Optibelt DK series belt; the profile is BB and the length is 2800 mm.
Also inspect the drive while the belt is off. Check pulley grooves for wear or debris, confirm the pulleys are aligned, and verify the belt path and tensioner condition. If the drive runs more than one belt, replace the full set so the load stays even across the belts. Send the part number, the profile and the length for a quote.
Dimensions
- Section
- BB
- Length
- 2800mm
Frequently asked questions
- How do I confirm this double-V belt fits my drive?
- Match the profile and length to the belt you are replacing. This belt is BB profile with a length of 2800 mm. If the old belt is unreadable, measure the length and check the pulley groove profile against a BB section.
- What should I send to request a quote?
- Send the part number HBB 2800, or the brand Optibelt, series DK, profile BB and length 2800 mm. A photo of the back of the old belt also helps confirm the correct item.
- Should I replace all belts on the drive at once?
- If the drive uses multiple belts, replacing them as a set helps keep tension and load even. Inspect the pulleys and alignment at the same time.