V-belt Optibelt HAA 2800
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- AA
- Series
- DK
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT HAA 2800 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for HAA 2800 and any equivalents.
The Optibelt HAA 2800 is a double-V (hexagonal) belt in the DK series with an AA profile and a 2800 mm length. Before you fit it, take a few minutes to inspect the drive and sheaves. A worn sheave or a misaligned pulley will shorten the life of any new belt, so the inspection is part of the job.
Check the sheave grooves for wear, rust, or embedded debris. A groove that has worn wider will let the belt sit too deep, so it slips instead of gripping. Look at the sheave walls for a step or ridge where the belt has been running. If you can see a clear ridge, the sheave is worn and the new belt will not seat correctly.
Check alignment between the two sheaves with a straightedge or laser. Offset or angled sheaves pull the belt to one side, which is a common cause of edge wear on a double-V belt. Also check the bearings for play and the shaft for movement. Any wobble will show up as uneven wear on the new belt.
Confirm the part number on the old belt before you order. The Optibelt HAA 2800 is identified by the HAA 2800 code, the AA profile, and the 2800 mm length. Send that code to our team by WhatsApp or email and we will confirm the belt or suggest an equivalent.
Dimensions
- Section
- AA
- Length
- 2800mm
Frequently asked questions
- What should I check on the drive before fitting an Optibelt HAA 2800?
- Inspect the sheave grooves for wear and debris, check alignment between the sheaves, and check bearings and shafts for play. Correct any issue before fitting the new belt.
- How do I identify the belt I need to replace?
- Read the marking on the back of the old belt. For this belt, look for the HAA 2800 code, the AA profile, and the 2800 mm length. Send that information to us for a quote.
- Can you help if I am not sure the HAA 2800 is the right belt?
- Yes. Send the part number and a photo of the old belt by WhatsApp or email. We will confirm the belt or suggest an equivalent.