Timing belt Optibelt H 950
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- ZR
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT H 950 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for H 950 and any equivalents.
The Optibelt ZR H 950 is a timing belt with an H profile and a length of 2413 mm. When you need to replace a synchronous belt, matching the profile and length to the old belt is the first step. This page covers what to check before you request a quote.
To match the H 950 to the belt being replaced, read the marking on the back of the old belt. Look for the profile letter and the length. The H 950 has an H profile and a length of 2413 mm, so those are the two values to confirm. If the old belt is worn or the marking is unreadable, measure the length along the belt's pitch line and check the profile against a known sample.
The Optibelt ZR series covers timing belts for synchronous drives. This belt is identified as H 950, which combines the profile and a length code. For a quote, send the part number H 950, the profile H, and the length 2413 mm. If you are replacing a belt on a drive that uses more than one belt, note the quantity and whether the drive requires a matched set.
Dimensions
- Profile
- H
- Length
- 2413mm
Frequently asked questions
- How do I confirm the H 950 is the right timing belt for my drive?
- Check the marking on the back of the belt you are replacing. The Optibelt ZR H 950 has an H profile and a length of 2413 mm. If those match the old belt, it is the correct size.
- What information should I send to request a quote?
- Send the part number H 950, the profile H, and the length 2413 mm. If you have the old belt, include a photo of the back marking and the drive setup.
- Can you help if I cannot read the marking on the old belt?
- Yes. Send the drive details and any measurements you can take. We can help confirm the profile and length so you get the correct Optibelt ZR H 950 or an equivalent size.