Timing belt Optibelt H 1100
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- ZR
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT H 1100 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for H 1100 and any equivalents.
This Optibelt ZR timing belt is identified by profile H and a length of 2794 mm. It is the type of synchronous belt used in industrial drives where teeth mesh with pulleys to keep shaft speed relationships fixed. Confirm fit by matching both the profile and the length to the belt you are replacing.
Timing belts like this H-profile Optibelt are common on drives that cannot tolerate slip: camshafts, pump drives, positioning axes and other synchronized equipment. Because the teeth carry the load, the correct profile and length are what matter most. A belt that is close but not exact will not run correctly.
The marking on the back of the old belt is the fastest way to confirm what you need. Read the profile and length, and note the Optibelt ZR H 1100 if that is what is printed. Then compare it with the drive's pulley grooves and the belt path before ordering.
If the marking is worn or missing, measure the belt length and identify the tooth profile from the pulleys. Send the part number, profile and length to our team by WhatsApp or email and we will confirm the Optibelt ZR H 1100 or help you find the right belt for the drive.
Dimensions
- Profile
- H
- Length
- 2794mm
Frequently asked questions
- What does the H profile mean on this Optibelt timing belt?
- H is the tooth profile of the belt. It must match the pulley grooves on your drive. The Optibelt ZR H 1100 uses the H profile and a length of 2794 mm.
- How do I confirm the Optibelt ZR H 1100 fits my drive?
- Check the marking on the back of the old belt for the profile and length, then compare with the pulleys and belt path. If the marking is unreadable, measure the length and identify the profile from the pulley teeth.
- What should I send to request a quote for this belt?
- Send the part number Optibelt ZR H 1100, along with the profile H and length 2794 mm if you have them. Photos of the old belt marking and the drive pulleys also help us confirm the correct belt.