Timing belt Optibelt DT5 625
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT DT5 625 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for DT5 625 and any equivalents.
The Optibelt Alpha Power DT5 625 is a double-sided timing belt with a 625 mm length. It suits drives where both faces of the belt carry teeth and must mesh with pulleys on either side. We carry this belt and quote it by part number.
Before you fit a double-sided timing belt, inspect the drive. Check both pulley faces for worn tooth flanks, debris in the grooves and damage from a previous belt failure. Confirm the pulleys are aligned and that the bearings and tensioner move freely. A worn sheave will shorten the life of any new belt, whatever its length.
Check the old belt against the new one. The Optibelt Alpha Power DT5 625 is a double-sided timing belt of 625 mm length, so the teeth on both faces and the overall length must match the drive. Read the marking on the back of the old belt and compare it with this part number before you order.
If two or more belts run on the same drive, replace them as a set so the load stays even. Send us the part number, the quantity and the drive details by WhatsApp or email, and our team will confirm the belt or suggest an equivalent.
Dimensions
- Length
- 625mm
Frequently asked questions
- How do I confirm the Optibelt Alpha Power DT5 625 is the right belt?
- Compare the part number and the 625 mm length against the marking on the belt you are replacing, and check that the drive uses toothed pulleys on both faces. If anything is unclear, send us the marking and the drive details and we will help confirm it.
- What should I check on the drive before fitting this belt?
- Inspect both pulley faces for worn or damaged teeth, remove debris from the grooves, and check alignment, bearings and the tensioner. Correcting these points before fitting protects the new belt.
- What information should I send for a quote?
- Send the part number DT5 625, the quantity you need and the drive details by WhatsApp or email. Our team replies promptly and can confirm the belt or suggest an equivalent.