Timing belt Optibelt DT10 1800

OPTIBELT DT10 1800 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for DT10 1800 and any equivalents.

The Optibelt DT10 1800 is a double-sided timing belt from the Alpha Power series, with a length of 1800 mm. It is used where a synchronous drive needs teeth on both faces, so the belt can transmit motion from either side. Match this part number to the belt you are replacing before you order.

The most reliable way to identify the correct belt is to read the marking on the back of the belt currently on the drive. Look for the Optibelt name, the Alpha Power series and the code DT10 1800. If the old belt is worn, glazed, cracked or has missing teeth, the marking may be difficult to read, so clean the back of the belt and check under good light. A photo of the marking and a photo of the full belt on the drive help us confirm the part.

Because this is a double-sided timing belt, both faces carry teeth. When you replace it, inspect the pulleys for worn grooves, debris or damage, and check the tensioner and idler bearings. A belt that has run out of alignment or under the wrong tension can fail early even if the part number is correct. If the drive uses more than one belt, replace the set together so the load is shared evenly.

To request a quote, send the part number DT10 1800, the Optibelt brand and the Alpha Power series by WhatsApp or email. Include the quantity you need and the length in millimeters if you want us to double-check it. If you are unsure whether this is the right belt, send the marking from the old belt and we will help confirm it or suggest an equivalent.