Timing belt Optibelt D8M 920 (HTD)

OPTIBELT D8M 920 (HTD) belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for D8M 920 (HTD) and any equivalents.

When you are replacing a double-sided timing belt, the most reliable approach is to match the belt you are removing. This Optibelt D8M 920 (HTD) from the Omega series is a double-sided timing belt with a length of 920 mm. Use the marking on the old belt and the drive layout to confirm it is the correct fit.

Start by reading the back of the belt you are replacing. You are looking for the profile, the length and the construction. This belt is a double-sided timing belt in the 8M profile, with a length of 920 mm. Both sides carry teeth, so it can drive from either face. Confirm that the failed belt is also double-sided and that the length matches 920 mm before you order.

Check the drive for any other reason the belt might have failed. Look for worn or misaligned pulleys, damaged teeth, or a tensioner that no longer moves freely. A double-sided timing belt is often used where two pulleys need to turn in opposite directions, so verify the routing against the belt you removed. If the old belt is too worn to read, measure the length and count the teeth on the pulleys to confirm the 8M profile.

If you are unsure, send us the part number and a photo of the belt marking. We carry the Optibelt D8M 920 (HTD) and can help you confirm it is the right belt for your drive. Quotes are handled by WhatsApp or email, and we reply promptly.