Timing belt Optibelt D8M 1128
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT D8M 1128 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for D8M 1128 and any equivalents.
The Optibelt D8M 1128 is a double-sided timing belt from the Omega series, with a length of 1128 mm. Before you install it, inspect the drive and sheaves so the new belt runs true and lasts.
Check the sheaves for worn teeth, burrs, or debris that can damage the belt. Confirm the pulleys are aligned and the bearings turn freely. A double-sided timing belt drives from both faces, so both sides of the drive need the same attention.
Measure the old belt and compare it to the 1128 mm length. A belt that has been run may measure differently, so use the part number as the reference. If the drive runs more than one belt, replace them as a set to keep loads even.
Send the part number D8M 1128 by WhatsApp or email to request a quote. If you are unsure about the profile or length, include a photo of the back marking and the drive layout so we can help confirm the right belt.
Dimensions
- Length
- 1128mm
Frequently asked questions
- What should I check on the drive before fitting this belt?
- Inspect both sheaves for wear, alignment, and cleanliness. Verify that all pulleys and bearings turn freely and that the drive is free of debris.
- How do I confirm the length?
- The Optibelt D8M 1128 has a length of 1128 mm. Compare it to your old belt and the drive specification, and use the part number as the primary reference.
- What information do you need for a quote?
- Send the part number D8M 1128 and the quantity. If you want us to help confirm the belt, include a photo of the back marking and the drive setup.