Timing belt Optibelt D14M 1610 (HTD)
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT D14M 1610 (HTD) belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for D14M 1610 (HTD) and any equivalents.
The Optibelt D14M 1610 (HTD) is a double-sided timing belt from the Omega series. Its 1610 mm length and HTD profile make it a candidate for drives that need synchronous motion from both faces of the belt.
When you read the marking, the profile and length are the two facts that matter most. The D14M profile is an HTD (High Torque Drive) tooth form, and the 1610 mm length is the datum length for this belt. The double-sided construction means teeth are on both sides, so the belt can drive pulleys from either face.
For replacement, confirm the old belt's marking matches D14M 1610 (HTD). If the drive uses two pulleys and the belt twists or runs over idlers on both sides, a double-sided belt is required. A single-sided belt of the same profile and length will not transmit motion correctly on the back side.
To request a quote, send the part number D14M 1610 (HTD) and the quantity you need. If you are unsure whether this is the correct belt for your drive, include the pulley tooth count, the center distance, and a photo of the old belt's marking. Our team can help confirm the right belt or suggest an equivalent.
Dimensions
- Length
- 1610mm
Frequently asked questions
- What does the D14M profile mean on this Optibelt belt?
- D14M indicates an HTD (High Torque Drive) tooth profile. The D prefix denotes a double-sided belt, meaning teeth are on both sides. This is a double-sided timing belt from the Omega series.
- How do I confirm the 1610 mm length is correct for my drive?
- Check the marking on the back of your old belt. If it reads D14M 1610 (HTD), the length matches. If the marking is different or unreadable, measure the old belt or provide the pulley tooth count and center distance for confirmation.
- What information should I send with my quote request?
- Send the part number D14M 1610 (HTD) and the quantity required. If you need help confirming the belt, include the pulley tooth count, center distance, and a photo of the old belt's marking.