V-belt Optibelt CX 195
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- CX
- Series
- Super TX
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and OPTIBELT: matching part numbers →DAYCO and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT CX 195 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for CX 195 and any equivalents.
The Optibelt Super TX CX 195 is a cogged classical V-belt in the CX profile with a length of 5055 mm. Before you fit it, inspect the drive and sheaves so the new belt runs true from the start. We carry this belt for maintenance, engineering and purchasing teams.
Worn sheave grooves, misalignment and damaged bearings will shorten the life of any belt. Check the sheaves for wear, burrs or grooves, confirm they are aligned, and make sure the drive turns freely before you install the Optibelt Super TX CX 195. Correcting the drive first protects the new belt and keeps the machine running.
The CX profile and 5055 mm length are the two values to match against the belt you are replacing. Read the marking on the back of the old belt and compare it with the CX 195. If the drive uses more than one belt, replace the full set at the same time so the load stays even across the grooves.
Dimensions
- Section
- CX
- Length
- 5055mm
Frequently asked questions
- What do I need to send for a quote on the Optibelt Super TX CX 195?
- Send the part number CX 195, the profile CX and the length 5055 mm by WhatsApp or email. Our team replies promptly and can help confirm the right belt for your drive.
- Can I replace just one belt on a multi-belt drive?
- On a drive with several belts, replace the whole set at once. Mixing a new belt with worn belts can cause uneven tension and load across the grooves.
- What should I check on the sheaves before fitting this belt?
- Inspect the sheave grooves for wear, burrs or damage, check alignment, and confirm the drive turns freely. Correcting these points before fitting helps the belt seat and run properly.