V-belt Optibelt CX 112
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- CX
- Series
- Super TX
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and OPTIBELT: matching part numbers →DAYCO and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT CX 112 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for CX 112 and any equivalents.
The Optibelt CX 112 is a cogged classical V-belt in the Super TX series, with a CX profile and a length of 2946 mm. Before fitting it, inspect the drive and sheaves so the new belt runs true from the start.
Check sheave grooves for wear, polish, or embedded debris, and confirm the grooves match the CX profile. Misaligned or worn sheaves can shorten belt life and cause noise or vibration. Verify that shafts turn freely and that no guard or bracket interferes with the belt path.
Confirm the old belt marking and measure its length against the 2946 mm figure for the CX 112. The same size is also listed under Dayco CX 112, which can help when comparing what is on the drive now. If the marking is worn away, send the drive details and current belt code for a quote.
When replacing more than one belt on a multi-belt drive, fit the full set at the same time so loads stay even. After installation, recheck tension and alignment, then run the drive briefly and inspect again for seating and tracking.
Dimensions
- Section
- CX
- Length
- 2946mm
Frequently asked questions
- What should I check on the drive before fitting this belt?
- Inspect sheave grooves for wear or debris, confirm they match the CX profile, check alignment, and make sure shafts turn freely with no interference along the belt path.
- How do I confirm this is the right belt for my drive?
- Compare the old belt marking and its length against the CX 112 code and the 2946 mm length. The same size is also listed under Dayco CX 112 for reference.
- What information do you need for a quote?
- Send the part number CX 112, the belt marking if it is readable, and the drive details. We reply by WhatsApp or email and can help confirm the right belt.