V-belt Optibelt C KB 5300
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- KB VB
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT C KB 5300 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for C KB 5300 and any equivalents.
This Optibelt C KB 5300 is a banded V-belt from the KB VB series, with a length of 5300 mm. Banded V-belts are used where several V-belts run side by side and must stay aligned, such as drives that need the ribs to work as one unit. To confirm it fits your drive, match the part number and the 5300 mm length to the belt you are replacing.
The banded construction ties the individual V-belts together, which helps keep them from turning over or whipping on drives with long center distances or pulsating loads. On a maintenance or engineering check, look at the sheave grooves, the alignment of the pulleys, and the condition of the belt that came off. If the old belt is worn, stretched or has damaged ribs, use the marking on its back to identify the replacement.
The marking on this belt reads Optibelt C KB 5300. Confirm that the replacement carries the same part number and the same 5300 mm length. KB VB is the series, and the belt is a banded V-belt. Send the part number, the length, and a photo of the back marking if you want us to check it against your request.
Dimensions
- Length
- 5300mm
Frequently asked questions
- How do I confirm this Optibelt C KB 5300 fits my drive?
- Match the part number and the 5300 mm length to the belt you are removing. Check the belt marking on the back and compare it with the data on this page. If the numbers match, the belt is the same size.
- What should I send to request a quote for this belt?
- Send the part number Optibelt C KB 5300 and the length 5300 mm by WhatsApp or email. A photo of the old belt marking helps us confirm the correct item.
- Where are banded V-belts like this one used?
- Banded V-belts are used on drives that run multiple V-belts in parallel and need them to stay aligned as a set. They are common where the drive has long center distances or load fluctuations that can make single belts turn over.