V-belt Optibelt C 86
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- VB
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and OPTIBELT: matching part numbers →OPTIBELT and STARK: matching part numbers →MITSUBOSHI and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT C 86 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for C 86 and any equivalents.
The Optibelt VB C 86 is a classical V-belt with a C profile and a 2286 mm length. Before fitting it, inspect the drive and sheaves so the new belt runs true from the start.
Check sheave grooves for wear, rust, or embedded debris, and confirm the grooves match the C profile. Measure the groove width and look for a step or ridge where the belt has worn into the sheave. Misaligned sheaves or worn grooves can shorten belt life and cause vibration, even when the replacement belt is correct.
Verify the drive center distance and the belt path, then check that the take-up allowance can accommodate a belt of this length. The Optibelt VB C 86 has a top width of 22 mm, a height of 14 mm, and a 40-degree angle. Confirm the sheave groove angle is compatible with the belt angle before installation.
The same size is also listed under Stark C 86 and Mitsuboshi C 86. To request a quote, send the part number Optibelt VB C 86, the profile C, and the 2286 mm length by WhatsApp or email. Our team can help confirm the right belt for your drive.
Dimensions
- Section
- C
- Length
- 2286mm
Frequently asked questions
- What should I check on the drive before installing this belt?
- Inspect sheave grooves for wear, rust, or debris, confirm the grooves match the C profile, and check sheave alignment. Verify the drive center distance and take-up allowance for a 2286 mm belt.
- What are the dimensions of the Optibelt VB C 86?
- It has a C profile, a 2286 mm length, a top width of 22 mm, a height of 14 mm, and a 40-degree angle.
- How do I request a quote for this belt?
- Send the part number Optibelt VB C 86, the profile C, and the 2286 mm length by WhatsApp or email. Our team replies promptly and can help confirm the right belt for your drive.