V-belt Optibelt C 315
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- VB
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT C 315 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for C 315 and any equivalents.
This Optibelt C 315 belt is a classical V-belt in the C profile. It measures 8103 mm in length, with a 22 mm top width, a 14 mm height and a 40° angle. Use these figures to match it against the belt you are replacing.
To confirm the match, read the marking on the back of the old belt. The C profile and the 8103 mm length must agree with the belt currently on the drive. Check the top width and height against the pulley groove, and confirm the 40° angle is consistent with the sheave.
If the old belt is worn or the marking is no longer legible, measure the outside length and compare it to the 8103 mm figure. A belt that is too long or too short will not sit correctly in the groove. When the drive uses multiple belts, replace them as a set so the load is shared evenly.
We carry the Optibelt C 315 for maintenance, engineering and purchasing teams. Send the part number by WhatsApp or email to request a quote. If you need help confirming the right belt or an equivalent, include the profile, length and width from the old belt.
Dimensions
- Section
- C
- Length
- 8103mm
Frequently asked questions
- How do I confirm the Optibelt C 315 is the correct replacement?
- Check the marking on the back of the belt you are replacing. The profile should read C, and the length should match 8103 mm. Also verify the 22 mm top width, 14 mm height and 40° angle against the pulley groove.
- What should I send to request a quote for the C 315?
- Send the part number C 315 by WhatsApp or email. If you are unsure, include the profile and length from the old belt, along with the top width and height, so we can help confirm the right belt or suggest an equivalent.
- Should I replace multiple belts on the same drive at once?
- Yes. When a drive uses more than one belt, replace them as a set. Belts that have run for different lengths of time can sit at different tensions and may not share the load evenly.