V-belt Optibelt C 188
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- VB
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
MITSUBOSHI and OPTIBELT: matching part numbers →GATES and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT C 188 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for C 188 and any equivalents.
The Optibelt C 188 is a classical V-belt with a C profile and a length of 4877 mm. When you are replacing a belt on an existing drive, the most reliable approach is to match the belt you are removing rather than relying on a catalog guess.
Start by reading the marking on the back of the old belt. Look for the profile letter and the length number, then confirm the physical dimensions: this belt has a top width of 22 mm, a height of 14 mm and a 40-degree angle. If the old marking is worn or missing, measure the outside length and compare it to the 4877 mm figure.
The same size is also listed under Mitsuboshi C 188 and Gates C 188, so you can cross-check what is already on the drive against those brands. If the belt has been running in a set, replace all belts in the set at the same time so the load stays evenly divided.
For a quote, send the part number C 188, the brand Optibelt and the quantity you need. If you are unsure whether this is the correct belt, include a photo of the old belt marking and the drive sheave dimensions.
Dimensions
- Section
- C
- Length
- 4877mm
Frequently asked questions
- How do I confirm the Optibelt C 188 is the right belt for my drive?
- Check the marking on the old belt for a C profile and a 188 length, then verify the dimensions: 22 mm top width, 14 mm height and 40-degree angle. If the old belt matches these figures, the C 188 is the correct size.
- Can I use this belt to replace a Mitsuboshi C 188 or Gates C 188?
- The same size is also listed under Mitsuboshi C 188 and Gates C 188. If your drive currently uses one of those, the Optibelt C 188 is the equivalent size to order.
- What information should I send with my quote request?
- Send the part number C 188, the brand Optibelt and the quantity required. If you want us to confirm the belt, include a photo of the old belt marking and the sheave dimensions.