V-belt Optibelt C 122
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- VB
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and OPTIBELT: matching part numbers →OPTIBELT and STARK: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT C 122 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for C 122 and any equivalents.
The Optibelt C 122 is a classical V-belt with a C profile and a length of 3200 mm. Its 22 mm top width, 14 mm height and 40-degree angle match standard C-section sheaves. Before fitting a new belt, inspect the drive and sheaves so the replacement runs correctly.
Check sheave grooves for wear, rust or buildup that can shorten belt life. Confirm the sheave groove angle and width suit a 22 mm top width and 14 mm height belt. Misaligned or worn sheaves will damage a new belt, so correct any issues before installation.
Verify the belt length against the drive. The C 122 is 3200 mm long, and the same size is also listed under Stark as C 122. If you are replacing an existing belt, read the marking on the back and match the profile and length. We carry Optibelt belts and can help confirm the right belt for your drive.
When you request a quote, send the part number C 122 and the quantity you need. If you are unsure of the profile or length, include the old belt marking and a photo of the drive. Our team replies promptly by WhatsApp or email and can suggest an equivalent.
Dimensions
- Section
- C
- Length
- 3200mm
Frequently asked questions
- What are the dimensions of the Optibelt C 122?
- It has a C profile, a 3200 mm length, a 22 mm top width, a 14 mm height and a 40-degree angle.
- How do I check the drive before fitting this belt?
- Inspect sheave grooves for wear, rust or buildup, confirm the groove angle and width suit the belt, and check alignment. Correct any issues before installation.
- What should I send to get a quote for the C 122?
- Send the part number C 122 and the quantity you need. If you are unsure of the profile or length, include the old belt marking and a photo of the drive.