V-belt Optibelt C 107
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- VB
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
OPTIBELT and STARK: matching part numbers →GATES and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT C 107 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for C 107 and any equivalents.
The Optibelt C 107 is a classical V-belt in profile C with a length of 2819 mm. The 40-degree angle and 22 mm top width by 14 mm height define how it seats in a standard C-section pulley groove. This page is for maintenance and purchasing teams who select by profile and length.
Profile and length are the two dimensions that matter first. The C profile sets the cross-section: 22 mm across the top, 14 mm high, with a 40-degree angle. The 2819 mm length is the datum you match against the drive. If your old belt is marked C 107, this is the same size. The same size is also listed under Stark C 107 and Gates C 107, so you can compare what your plant already runs.
Before ordering, check the drive for worn or misaligned pulleys, since a classical V-belt wears faster when the groove is rough or the sheaves are out of line. Confirm the belt sits correctly in the groove and that the take-up has enough travel. For drives with multiple belts, replace the full set at once so the load stays shared evenly.
To request a quote, send the part number C 107, the quantity, and the drive it goes on. If you are unsure of the profile or length, send a photo of the marking on the back of the belt and the pulley dimensions. The team can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- C
- Length
- 2819mm
Frequently asked questions
- What do the profile and length tell me about the Optibelt C 107?
- Profile C gives a 22 mm top width, 14 mm height and a 40-degree angle, so it fits a standard C-section pulley groove. The 2819 mm length is the belt length you match to the drive.
- How do I confirm this is the belt I need?
- Read the marking on the back of the old belt. If it shows C 107, this is the same size. You can also measure the top width and height and check the length against the drive.
- What should I send to get a quote?
- Send the part number C 107, the quantity, and the drive it runs on. If the marking is worn, send a photo of the belt and the pulley dimensions so the team can confirm the right belt or suggest an equivalent.