V-belt Optibelt BX 88
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BX
- Series
- Super TX
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
DAYCO and OPTIBELT: matching part numbers →GATES and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT BX 88 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BX 88 and any equivalents.
The Optibelt BX 88 Super TX is a cogged classical V-belt in the BX profile with a length of 2311 mm. To match it to the belt you are replacing, confirm both the profile and the length rather than relying on the part number alone.
Start with the marking on the back of the old belt. If it reads BX 88, this Optibelt Super TX belt matches that profile and length. If the marking is worn or missing, measure the belt and compare the profile and the 2311 mm length to the data here. The same size is also listed under Dayco BX 88 and Gates BX 88, so you may see those markings on the belt you are removing.
The BX profile is a narrow cross-section, and the cogged construction is typical of classical V-belts used on drives where the belt bends over smaller pulleys. When you have the old belt in hand, check the profile against the pulley groove and confirm the length before ordering.
Send the part number, the profile and the length in your quote request. If the marking is unclear, send a photo of the belt and the drive so we can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- BX
- Length
- 2311mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Check the marking on the back of the belt you are replacing. If it shows BX 88, this Optibelt Super TX belt matches that profile and length. If the marking is not readable, measure the belt and compare the profile and the 2311 mm length.
- What should I send with my quote request?
- Send the part number, the profile and the length. If you are not sure of the marking, send a photo of the old belt and the drive so we can help confirm the right belt or suggest an equivalent.
- Is the same size listed under other brands?
- Yes. The same size is also listed under Dayco BX 88 and Gates BX 88, so you may see those markings on the belt you are replacing.