V-belt Optibelt BX 66
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BX
- Series
- Super TX
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and OPTIBELT: matching part numbers →OPTIBELT and STARK: matching part numbers →DAYCO and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT BX 66 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BX 66 and any equivalents.
This Optibelt Super TX BX 66 is a cogged classical V-belt with a BX profile and a length of 1753 mm. Cogged classical V-belts are used on industrial drives where a standard wrapped belt may not provide enough flexibility or where heat dissipation matters. To confirm fit, match the profile and length to your drive's requirements.
The BX profile is a classical V-belt cross-section, and the cogged construction helps the belt run cooler and flex over small pulleys. This belt is commonly found on drives in fans, pumps, compressors, and other industrial machinery. Because the BX profile is a standard size, you can often replace an existing belt by matching the profile and length.
When ordering, check the marking on the old belt. It should show the profile and length, such as BX and 1753 mm. If the marking is worn, measure the outside length and compare it to the 1753 mm specification. Also inspect the pulleys for wear or misalignment, as these can cause premature belt failure.
The same size is also listed under Stark BX 66 and Dayco BX 66. If you need help confirming the right belt, send the part number or a photo of the old belt's marking to our team via WhatsApp or email. We will reply promptly with a quote or a suggested equivalent.
Dimensions
- Section
- BX
- Length
- 1753mm
Frequently asked questions
- What is the Optibelt Super TX BX 66 belt used for?
- It is a cogged classical V-belt for industrial drives, such as fans, pumps, and compressors, where the BX profile and 1753 mm length match the drive's requirements.
- How do I confirm the BX 66 fits my drive?
- Check the marking on your old belt for BX and 1753 mm. If the marking is not clear, measure the outside length and compare it to 1753 mm. Also verify the pulley groove profile is BX.
- Can I replace a BX 66 with another brand?
- The same size is also listed under Stark BX 66 and Dayco BX 66. Send us the part number or a photo of your old belt, and we can help confirm the right replacement.