V-belt Optibelt BX 57
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BX
- Series
- Super TX
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and OPTIBELT: matching part numbers →OPTIBELT and STARK: matching part numbers →DAYCO and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT BX 57 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BX 57 and any equivalents.
The Optibelt BX 57 Super TX is a cogged classical V-belt with a BX profile and a length of 1524 mm. Before you fit it, inspect the drive and sheaves so the new belt runs true and wears evenly.
Check sheave grooves for wear, rust, or embedded debris. Worn grooves let the belt sit too deep, which leads to slip and heat. Confirm the sheaves are aligned and the shafts turn freely. If a sheave is damaged, correct it before fitting the Optibelt BX 57.
On multi-belt drives, replace all belts at the same time so lengths match and load is shared. A single new belt alongside stretched ones will carry more than its share and fail early. For a quote, send the part number BX 57 and the quantity you need.
The same size is also listed under Stark BX 57 and Dayco BX 57. If you are unsure this is the right belt, send a photo of the marking on the back of the old belt and the sheave dimensions, and we will help confirm the match.
Dimensions
- Section
- BX
- Length
- 1524mm
Frequently asked questions
- What should I check before installing this belt?
- Inspect the sheaves for wear, rust, or debris, verify alignment, and confirm the shafts turn freely. Correct any sheave damage before fitting the new belt.
- Should I replace all belts on the drive at once?
- Yes. On a multi-belt drive, replace the full set so the belts share load evenly and wear at the same rate.
- How do I request a quote for the Optibelt BX 57?
- Send the part number BX 57 and the quantity you need by WhatsApp or email. If you want us to confirm the match, include a photo of the old belt marking and the sheave dimensions.