V-belt Optibelt BX 54
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BX
- Series
- Super TX
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and OPTIBELT: matching part numbers →OPTIBELT and STARK: matching part numbers →DAYCO and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT BX 54 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BX 54 and any equivalents.
The Optibelt Super TX BX 54 is a cogged classical V-belt with a BX profile and a length of 1448 mm. If you are replacing a belt on an existing drive, this page covers how to match it to the belt coming off.
Start with the marking on the back of the old belt. It should read BX 54. The BX profile sets the cross-section, and the 54 designation corresponds to the 1448 mm length given here. Compare that marking with the belt in hand before you order, especially if the drive has been modified or the belt was replaced with something other than the original.
Check the old belt for wear that could point to a drive problem: cracks, missing cogs, glazing, or uneven sidewall wear. A belt that has stretched or worn narrow may sit differently in the pulley, so confirm the pulley grooves are clean and the sheaves are aligned. When a drive uses multiple belts, replace them as a set so the load stays evenly distributed.
The same size is also listed under Stark BX 54 and Dayco BX 54, which can help if you are comparing what is already on the shelf. We carry the Optibelt Super TX BX 54. Send the part number, the marking from the old belt, and the quantity you need by WhatsApp or email, and the team will confirm the right belt or suggest an equivalent.
Dimensions
- Section
- BX
- Length
- 1448mm
Frequently asked questions
- How do I confirm the BX 54 is the belt I need?
- Read the marking on the back of the belt being replaced. It should show BX 54. The BX profile and the 1448 mm length on this page match that marking. If the old belt is unmarked or the drive has been changed, send photos of the belt and pulleys so the team can help confirm.
- What should I send to request a quote?
- Send the part number BX 54, the quantity, and the marking from the old belt if you have it. If you are unsure between this belt and another, include the drive details and a photo of the belt so the team can confirm the right one or suggest an equivalent.
- Is the same size listed under other brands?
- Yes. The same size is also listed under Stark BX 54 and Dayco BX 54. We carry the Optibelt Super TX BX 54.