V-belt Optibelt BX 45.5
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BX
- Series
- Super TX
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT BX 45.5 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BX 45.5 and any equivalents.
The Optibelt BX 45.5 Super TX is a cogged classical V-belt with a BX profile and a 1232 mm length. When you are replacing a belt on an existing drive, this is the number to match against the belt you are removing.
Start by reading the marking on the back of the old belt. You are looking for the profile, BX, and the length, 1232 mm, which is what this Optibelt Super TX belt carries. If the old belt is worn or the marking is gone, measure the outside length and compare it to the 1232 mm figure rather than guessing from the drive.
A cogged classical V-belt of this profile and length is selected by those two values, not by the equipment it came off. Once you have confirmed BX and 1232 mm, the Optibelt BX 45.5 Super TX is the direct match. If your drive runs more than one belt, replace the full set at the same time so the load stays even across the grooves.
Send the part number, BX 45.5, and the length, 1232 mm, when you request a quote. If you are unsure whether the belt on your drive is the correct one, include a photo of the back marking and the drive itself, and the team can confirm the profile and length before you order.
Dimensions
- Section
- BX
- Length
- 1232mm
Frequently asked questions
- How do I confirm the Optibelt BX 45.5 is the belt I need?
- Check the marking on the back of the belt you are replacing. It should show the BX profile and a 1232 mm length, which matches this belt. If the marking is unreadable, measure the outside length and compare it to 1232 mm.
- Can I replace just one belt on a multi-belt drive?
- It is good practice to replace all belts in the set at the same time. Mixing a new belt with worn ones can cause uneven tension and load across the grooves.
- What should I send to request a quote?
- Send the part number BX 45.5 and the length 1232 mm. If you want confirmation first, include a photo of the back marking and the drive, and the team will check the profile and length.