V-belt Optibelt BCP 615
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Conveyor Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT BCP 615 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BCP 615 and any equivalents.
The Optibelt BCP 615 is a classical V-belt in the Conveyor Power series. It has a B profile, a 17 mm top width, an 11 mm height and a 40 degree angle, with a length of 15697 mm. This is a long belt, so it suits drives where the center distance is large and the belt runs over widely spaced pulleys.
Classical V-belts like this one are used on industrial drives that turn fans, pumps, compressors and similar equipment. The B profile is a standard cross-section, so the first check is that the old belt carries a B marking and that the pulley grooves accept that section. A belt that sits too high or too low in the groove will slip or wear quickly.
The second check is length. Measure the old belt or read the number on its back and compare it with 15697 mm. Because this belt is long, confirm the take-up allowance on the drive before ordering, and inspect the pulleys for wear, alignment and groove depth while the belt is off.
If you are not sure the BCP 615 is the right fit, send the part number from the old belt, the pulley diameters and the center distance. We carry Optibelt and can help confirm the correct belt for your drive.
Dimensions
- Section
- B
- Length
- 15697mm
Frequently asked questions
- How do I confirm the BCP 615 fits my drive?
- Check that the old belt is a B profile with a 17 mm top width and that the length matches 15697 mm. Also confirm the pulley grooves are not worn and that the drive has enough take-up for a belt this long.
- What information should I send for a quote?
- Send the part number BCP 615, or the marking from the back of the old belt, along with the pulley diameters and the center distance. Photos of the drive and the old belt help us confirm the fit.
- Can you help if the BCP 615 is not the right belt?
- Yes. Send us the details of your drive and the old belt, and we will review the profile and length to help you confirm the correct belt.