V-belt Optibelt BCP 590
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Conveyor Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT BCP 590 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BCP 590 and any equivalents.
The Optibelt BCP 590 is a Conveyor Power classical V-belt in profile B, with a 15062 mm length, 17 mm top width, 11 mm height and a 40 degree angle. When you are replacing a belt on a conveyor drive, the most reliable starting point is the old belt itself. This page covers how to match the BCP 590 to the belt it replaces and what to send for a quote.
Read the marking on the back of the belt you are removing. Confirm that the part number, profile and length agree with the BCP 590. If the old belt is worn, cut or missing its marking, measure the outside length and the top width, and note the profile. A profile B belt is 17 mm across the top and 11 mm high, with a 40 degree angle; the BCP 590 is 15062 mm long.
You can also match by the drive. A classical V-belt must sit correctly in the pulley groove, so compare the top width and height of the old belt with the BCP 590. If the drive runs more than one belt, replace the full set at the same time so the belts share the load evenly. Inspect the pulleys for wear, alignment and debris before installing the new belt.
Send us the part number BCP 590, or the marking from your old belt, by WhatsApp or email. If the marking is unreadable, send the profile, the length and a photo of the belt and the drive nameplate. Our team replies promptly and can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- B
- Length
- 15062mm
Frequently asked questions
- How do I confirm the BCP 590 matches the belt I am replacing?
- Check the marking on the back of the old belt against the BCP 590. Confirm the profile is B and the length is 15062 mm. If the marking is gone, measure the outside length and the top width, and compare them with the 17 mm top width and 11 mm height of this belt.
- What should I send to request a quote?
- Send the part number BCP 590, or the full marking from the old belt, by WhatsApp or email. If you do not have the number, send the profile, the length, and a photo of the belt and the drive nameplate. The team will reply promptly.
- Should I replace more than one belt at a time?
- If the drive uses multiple belts, replace the full set together so they carry the load evenly. Mixing a new belt with worn belts can cause uneven tension and faster wear.