V-belt Optibelt BCP 380

OPTIBELT BCP 380 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BCP 380 and any equivalents.

This Optibelt BCP 380 belt is a classical V-belt in the Conveyor Power series. It has a B profile, a length of 9728 mm, a top width of 17 mm, a height of 11 mm and a 40-degree angle. For a maintenance or purchasing professional, the profile and length are the two figures that determine whether this belt will fit a given drive.

Profile B sets the cross-section: 17 mm across the top and 11 mm high, with a 40-degree angle. The length of 9728 mm is the datum you match against the old belt or the drive specification. When you send a quote request, include the part number BCP 380 and confirm the profile and length so the team can check the details against your application.

If you are replacing a belt on an existing drive, the most reliable reference is the marking on the back of the old belt. Read the profile and length from that marking and compare them with the figures above. The Optibelt BCP 380 is a classical V-belt, so it is used where a classical cross-section is specified rather than a narrow wedge or synchronous profile.

For drives that run more than one belt, inspect the full set before ordering. A new belt matched with worn belts can sit at a different height in the groove and change how the drive runs. Note the quantity you need and the part number BCP 380, then request a quote by WhatsApp or email.