V-belt Optibelt BCP 270

OPTIBELT BCP 270 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BCP 270 and any equivalents.

The Optibelt BCP 270 is a classical V-belt in profile B with a length of 6934 mm. It measures 17 mm across the top, 11 mm in height and has a 40-degree angle. Use it as a reference when checking a drive before fitting a new belt.

Before fitting the BCP 270, inspect the sheaves. Check groove wear, cracks, burrs and any buildup in the grooves, since worn or damaged sheaves can shorten the life of a new belt. Confirm the sheave groove profile matches the belt's B profile and 40-degree angle, and make sure the sheaves are aligned so the belt runs straight in the grooves.

Also check the drive for the conditions that caused the old belt to be replaced. Look for worn bearings, loose mounts, damaged guards and any obstruction in the belt path. A belt in profile B with a 6934 mm length and 17 mm top width must sit correctly in the groove, neither riding high nor bottoming out, so verify fit before tensioning.

If the drive uses more than one belt, replace the full set so all belts share the load evenly. Record the part number BCP 270 and the belt's markings from the back of the old belt. For a quote, send the part number, profile B, length 6934 mm and the quantity you need by WhatsApp or email.