V-belt Optibelt BCP 180
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Conveyor Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT BCP 180 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BCP 180 and any equivalents.
The Optibelt BCP 180 is a classical V-belt in profile B with a length of 4648 mm. It is part of the Optibelt Conveyor Power series. To confirm this is the belt on your drive, start by reading the marking on the back of the old belt.
The marking on a belt back typically shows the profile and the part number. On the BCP 180, the profile is B, the top width is 17 mm, the height is 11 mm, and the angle is 40 degrees. The length is 4648 mm. These values are the ones to compare with the old belt before ordering.
When the marking is worn or unreadable, measure the top width and the outside length, then match them to the profile and length above. A belt that is too narrow or too long will not sit correctly in the pulley groove. If the drive uses multiple belts, replace the full set so the load stays evenly distributed.
We carry the Optibelt BCP 180 for maintenance, engineering and purchasing teams. To request a quote, send the part number BCP 180 by WhatsApp or email. If you need help confirming the right belt, include the old marking or the measured profile and length.
Dimensions
- Section
- B
- Length
- 4648mm
Frequently asked questions
- How do I confirm the Optibelt BCP 180 is the correct belt?
- Read the marking on the back of the old belt. If it shows profile B and the part number BCP 180, it matches. If the marking is unreadable, measure the top width and the outside length and compare them with 17 mm and 4648 mm.
- What should I send to get a quote for the BCP 180?
- Send the part number BCP 180 by WhatsApp or email. If you want us to help confirm the right belt, include the old marking or the measured profile and length.
- Should I replace all belts on the drive at the same time?
- On a multi-belt drive, replace the full set. Mixing a new belt with worn belts can cause uneven loading and vibration.