V-belt Optibelt BCP 158
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Conveyor Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT BCP 158 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BCP 158 and any equivalents.
A classical V-belt wears, stretches and eventually has to be replaced. The Optibelt BCP 158 is a B-profile belt with a 4089 mm length, a 17 mm top width, an 11 mm height and a 40 degree angle. Start by reading the marking on the belt you are removing.
The marking on the back of a belt is usually the fastest way to identify a replacement. Copy it exactly, including the profile letter and the length, and note anything else printed on the belt. If the marking is worn off, measure the belt and send the profile and length you find, along with a photo of the drive and the pulley grooves.
The BCP 158 is a B-profile classical V-belt, 4089 mm long, with a 17 mm top width, an 11 mm height and a 40 degree angle. These are the figures to compare against your old belt before ordering. Where a drive runs more than one belt, replacing the full set keeps the load shared evenly across the grooves.
When you send the marking or the measurements, include the quantity you need and the drive it runs on. We carry Optibelt belts and will confirm the BCP 158 against your details or suggest an equivalent.
Dimensions
- Section
- B
- Length
- 4089mm
Frequently asked questions
- What should I send to get a quote for the Optibelt BCP 158?
- Send the part number or the marking from your old belt, the quantity you need, and the drive it runs on. A photo of the belt and the pulley grooves helps us confirm the profile.
- How do I identify the belt if the marking is unreadable?
- Measure the top width, the height and the outside length, and note the angle if you can. For this belt those figures are 17 mm top width, 11 mm height, 4089 mm length and a 40 degree angle.
- Should I replace more than one belt at a time?
- On a multi-belt drive, replacing the full set keeps tension and load shared evenly. Send the number of belts on the drive with your request.